Toro Rain Dial Bedienungsanleitung PDF herunterladen (Seite 15)

Semi-Auto operation runs an entire program (A, B or C) whenever you want a

supplemental watering.

Step 1 - Make sure the Function Switch is in the RUN position and the Multi-Function

Dial is pointing to the CURRENT TIME position.

Step 2 - Use the Program Switch to select the program (A, B or C) you want to run.

Step 3 - Press the SEMI-AUTO Start Button to start the cycle. The controller will

resume its regular schedule when the cycle is finished.

To cancel the SEMI-AUTO operation, move the function switch to OFF or

STOP, then back to RUN or MANUAL.

Manual Operation runs a single valve for the duration you designate.

Step 1 - Make sure the Function Switch is in the RUN position.

Step 2 - Position the dial to the valve number (1–12) you want to run.

Step 3 - Use the +/- Buttons to specify the amount of time you want the valve to water.

Step 4 - Press the Manual Start Button.

Step 5 - Return the Multi-Function Dial to CURRENT TIME position. Move the Function

Switch to OFF or STOP position to cancel manual operation.

Note: If the Multi-Function Dial is left at the valve number position, the display will show

an M (for manual), the valve number, and the time remaining for that valve to run. When

the manual cycle is complete, the controller will resume its regular schedule.

Step 1 - Make sure the Multi-Function Dial points to the CURRENT TIME position.

Step 2 - Move the Function Switch to OFF.

The scheduled watering cycles will resume when the Function Switch is returned to

RUN position.

Step 1 - Disconnect the power source to the controller.

Step 2 - Carefully remove the fuse from the fuse clips.

Step 3 - Install a new 2.0 amps Slo-Blo fuse, ensuring

that it is securely seated at both ends of the

fuse clip. See Figure 6.

Step 4 - Restore power to the controller.

Semi-Auto Operation

Manual Operation

Manual Shut-Off

Fuse Replacement

Figure 6

2 Amps

Slo-Blo Fuse

WARNING: The fuse protects the transformer from overload due to a short

circuit condition. For continued protection against risk of fire, replace only

with the same type and rating of fuse. Ensure power to the controller is off

prior to removing or installing fuse.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Toro Rain Dial Bedienungsanleitung Seite 15