Toro 12 Bedienungsanleitung PDF herunterladen (Seite 20)

1. Within the Setup menu, turn the Upper Line knob to view the

following display:

2. Turn the Lower Line knob to select the preferred option.

Note: If a pump station is in use but no master valve is required,

use the Normally Closed/Pump On option.

MASTER VALVE/PUMP START

Normally Closed/Pump On

ASSIGN PUMP START OUTPUT

NOT ASSIGNED

Set Master Valve/Pump Start Option

• Normally Closed/Pump On (default)

• Normally Open/Pump Off

• None

Assign Pump Start Output

The controller features a dedicated master valve/pump start output

as a standard feature. The master valve is used to isolate the

mainline or a portion of the mainline when programmed as part of

flow monitoring. It enables the controller to troubleshoot and isolate

pipe malfunctions or other problems. Three choices provided are:

The controller allows the user to assign a pump start to a station output,

effectively decreasing the controller station count by 1. The assigned

station will be active with all stations. This feature is typically used in

combination with a normally-open (NO) type master valve to enable the

pump to operate while the NO master valve remains de-engerized (open).

1. Within the setup Menu, turn the Upper Line knob to view the

following display:

2. Turn the Lower Line knob to select the station number to be desig-

nated as the pump start output.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

Keine Kommentare

Toro 12 Bedienungsanleitung Seite 20