Toro Sentinel Bedienungsanleitung PDF herunterladen (Seite 24)

Manually clearing the station times in all 16 programs can be time consuming without

this option.

Wireless Group

Function Not Used – Removed in Firmware Version 1.42

Map Unit Precode

Function Not Used – Removed in Firmware Version 1.42

Two-Wire / Irritrol Mode

The default/standard setting for this option is OFF. Set this option to ON if the Sentinel is

connected to an Irritrol MC via RetroLink Card or if connected to a Two-Wire system.

Press ENTER to save your selection.

III. FLOW MENU

• K factor

• Offset Factor

• Current Flow

• Expected Flows

• Maximum Flows

• Flow Processing

• Read Flow Totals

Note: If a flow meter is connected to the satellite sensor terminals, the controller will

read and react to flow.

K Factor

This menu allows you to enter/edit the K factor associated with the flow metering device

being used. The K factor may be found in the specification sheet for the flow meter. Edit

the K factor by positioning the cursor under the desired digit and using the number keys

of the keypad. Press ENTER when editing is complete.

Offset Factor

This menu allows you to enter/edit the Offset Factor associated with the flow metering

device. The offset factor may be found in the specification sheet for the flow meter. Edit

the offset factor by positioning the cursor under the desired digit and using the number

keys of the keypad. Press ENTER when editing is complete.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Keine Kommentare

Toro Sentinel Bedienungsanleitung Seite 24